What is the best finish for a cutting board?

0 votes
asked May 31 in Do it yourself by pred988ae (480 points)
What is the best finish for a cutting board?

1 Answer

0 votes
answered Jun 7 by Chambliss (27,090 points)
The best finish for a cutting board is a shiny finish by using some Danish or boiled Linseed Oil.

You can also use mineral oil to seal your wood cutting board.

Using 3 or 4 tablespoons of mineral oil (look for food-grade mineral oil which contains no perfumes or chemicals, you can also purchase cutting board oil ) coat the cutting board.

Let the board sit for 30 minutes or so to allow the oil to be absorbed by the wood.

The best oil for butcher block countertops is food grade mineral oil.

Mineral oil, walnut oil, tung oil, polyurethane sealers, and modified plant oils can all be used for sealing butcher block countertops.

Many of them are inexpensive and effective, but food-safe options are always best for your kitchens butcher block countertop.

It's better to oil the wood if you want to protect the wood.

Although you can first oil the wood and then varnish it to protect the wood which can help the wood last longer and protect the wood better.

The varnish is more resistant to water, heat, solvents or other chemicals than oil.

It seals the surface. It is also a more glossy finish than oil. Varnish is gives a more glossy finish than oil.

The best oil to protect exterior wood is Teak Oil.

Teak oil provides excellent weather and water resistance and also helps teak wood (most outdoor furniture is teak) keep its lovely honey patina.

The primary use for Teak oil has traditionally been for exterior wood such as outdoor wooden furniture and for wood on boats.

Teak oil is designed to slow down the natural greying process of Teak whilst protecting it from weathering.

Teak oil has a shelf life of five years or more and should keep in a tightly closed full or nearly full container in a cool dry place.

If Teak oil is not stored well inside and contaminated by water, or any other chemical substances, it'll probably go bad easily.

Linseed Oil is also a good oil to protect exterior wood.

Linseed oil, also known as flaxseed oil, is one of the most popular wood finishes in the world.

Like other hand-rubbed oil finishes, linseed oil saturates deep into the wood grain to protect against scratches and changes in humidity.

Linseed Oil is a great protectant for wood both indoors and outdoors.

It beautifies any wood and, once cured, protects the wood from sun and water damage.

It can really reinvigorate old dried out wood and bring it back to a healthy status.

Tung Oil is also another good oil to protect exterior wood.

Tung oil or China wood oil is a drying oil obtained by pressing the seed from the nut of the tung tree.

The oil and its use are believed to have originated in ancient China and appear in the writings of Confucius from about 400 BC.

55,627 questions

61,191 answers

713 comments

3,335,434 users

...